Changzhou Taisheng Machinery Equipment Co.,Ltd.
TS Machinery - Specialize In Fabricating Shot And Sand Blasting Equipment For Surface Treatment Industry More Than 10 Years.
Add to Cart
Small Abrasive Blast Room No Foundation Pit Glass Bead Blasting for Light Duty Job
Working Principle
The sand material is recovered by the vacuum force generated by the negative pressure of fan, and then sucked through the pipe to separate the sand and dust, and the useful sand material can fall into the sand blasting tank automatically. The dust and other useless debris will enter the dust removal system to filter. Less maintenance cost.
Quick Detail
| No. | Item | Description |
| 1 | Material of product | Cast iron, cast steel, cast stainless steel; oil must be carried out before the sand blast |
| 2 | Surface cleaning requirements | Sa2.5; cleaning all internal and external surfaces |
| 3 | Working efficiency | ≥15m2/hr/single gun(φ10mm blast nozzle) |
| 4 | Abrasive available | Aluminum oxide, glass bead, steel shot, steel grit; not bigger than mesh 40 |
| 5 | Dust Emission | ≤80mg/m3 |
| 6 | Noise | <85dm |
| 7 | illuminance | ≥400Lux |
| 8 | Total Power | 18.5 kw (not include air compressor) |
Parts Introduction
1. Room Body: Light steel structure
2. Blasting Tank: Pressure Type
3. Filter
4. Abrasive Separator
5. Body Lining: Wear-resistant Rubber
Air Source: Screw Air Compressor, Freeze Drier, Air tank
Why TS sandblast room?
TS sandblast rooms are built to ensure most optimal production levels with low maintenance. Our sandblast rooms are specifically engineered to meet your blasting needs.
Main Advantages:
● No weather constraints. Blast anytime, any day.
● High production levels.
● Reduced media costs from recycled media recovery systems.
● Controlled work environments and exceptional lighting for consistent quality of work.
● Very clean work environments, contained dust
After Blasted
More information, please feel free to contact with us.