Changzhou Taisheng Machinery Equipment Co.,Ltd.
TS Machinery - Specialize In Fabricating Shot And Sand Blasting Equipment For Surface Treatment Industry More Than 10 Years.
Add to Cart
4kw Fan Dust Free Vacuum Sandblast Machine With 20m Blasting hose Using Steel Grit
Introduction
The TS Machinery dust free blasters provide an environmentally friendly blasting solution which is easy to use, versatile and powerful.
The use of steel abrasive provides cost effective, efficient and powerful blasting as well as close control of the surface preparation. Easily inter-changeable blast head fittings allow a variety of surfaces to be blasted including: flat, inside and outside corners, small & large diameter pipes etc. Additional accessories are available for specific applications such as to blast large horizontal surfaces or the edges of steel plates.
As the process is safe and dust free other production processes can be carried out close to the blasting operation.
Technical Specification
| Model | TS-300L |
| Size | 2100x1100x2300(L*W*H) |
| Weight | About 600kg |
| Voltage | 380V 50HZ |
| The dia of nozzle | 8mm |
| Working pressure | 4-7bar |
| Working radius | 20m |
| Working efficiency | 8-10m²/h |
| Working type | Automatic recycle type |
| Air consumption | 3-6m³/min(recommend to match with 37kw air compressor) |
| Fan power | 4kw |
| Filtration area | About 20m² |
| Cleaning level | Sa2.5-3 |
| Roughness | 40-70μm |
| Usable abrasive | G25-150 grits |
Features
Use vacuum blasting machine can avoid the environmental pollution of dust and the danger of workers’ healthy. The difference between vacuum blasting machine and traditional portable blasting pot is recycle system. When the machine is blasting, and it is recycling at the same time. We use special brush head, they are fit all (flat, cornered, radius) surfaces. The special brush head can recycle the blasted abrasive and dust, they are recycled into the separator. The abrasive is fell into the pressure tank and the dust is absorbed into the dust collector. The dust collector is automatic filter cleaning system,easy disposal of collected dust in a plastic bag.
1. This machine couldn’t occupy ventilation and special site(except the special condition). The total unit(including fan and dust collector) can be movable easily. It can save operating area and cost.
2. Equipped with adjust air valve, which can adjust intake air.
3. Equipped with remote control, easy to operate.
4. Equipped with special abrasive control valve, it can adjust the air flow and sand flow evenly. So we can get the suitable rate of air and abrasive, improve the working efficiency and quality.
5. Equipped with automatic filter cleaning system, easy operation and saver time and strength.
6. Reliable main machine parts, long lifetime and easy maintenance.
Maintenance
A. Check the recycle system, electrical system and spare parts, if they are broken, repair or change them.
B. Check every pressure gauge regularly.
C. Check if the hose, tube and cable protective layer is broken, change them if anything is broken.
D. Check the usage of fan, add lubricant in the fan regularly.
If the machine is under the status of rest, please put the machine in the area of dry and ventilated places, avoid direct sunlight.