Changzhou Taisheng Machinery Equipment Co.,Ltd.
TS Machinery - Specialize In Fabricating Shot And Sand Blasting Equipment For Surface Treatment Industry More Than 10 Years.
Add to Cart
Dust Free Vacuum Sandblast Machine φ10mm Nozzle Used In Marine And Shipping
Introduction
Marine Blast has recently invested in a state of the art TS Machinery closed circuit blasting system. It allows areas where contamination would be a issue to be blasted without any dust or pollution. It can also be used for confined spaces such as engine rooms and tanks. Marine Blast also comply to all health and Safety requirements with trained operators holding health and safety confined spaces certificates. This is a specialized field of work so feel free to contact us with your work tasks to be carried out safely and promptly.
Dry Blasting Recovery System
Many jobs now require that old style, productive, but highly offensive, open blasting be abandoned in favour of a more controlled approach. The industry recognizes Vacuum Blasting as a better alternative and there is no more proven system on the market than the TS Machinery. It is a dust free fully enclosed dry blasting system which is ideally suited for the removal of toxic coatings.
How does it work?
The TS Machinery machine mixes abrasive particles with compressed air to allow them to be blown on to the work surface at high speed which strips back the paint and other contaminants to original surface and all residues are contained and vacuumed back into the system. The system can also operate at low pressure ranging from 58-100 psi.
The heavy particles are separated from the dust; the particles are then allowed to fall into a collection drum. The mullet-cartridge dust collector captures the fine dust allowing it to fall into the collection drum and the air then passes through a filter to ensure that the discharge air is clean. With no moving parts, this air powered venturi system is the ultimate in reliability.
Technicial Speciafication
| Model | TS-300L |
| Size | 2100x1100x2300(L*W*H) |
| Weight | About 600kg |
| Voltage | 380V 50HZ |
| The dia of nozzle | 9mm |
| Working pressure | 4-7bar |
| Working radius | 60m |
| Working efficiency | 8-10m²/h |
| Working type | Automatic recycle type |
| Air consumption | 3-6m³/min(recommend to match with 37kw air compressor) |
| Fan power | 11kw |
| Filtration area | About 20m² |
| Cleaning level | Sa2.5-3 |
| Roughness | 40-70μm |
| Usable abrasive | G25-150 steel grits |
What are its advantages over conventional methods of cleaning?
Normal sandblasting cuts the contaminant from the surface, but causes toxic or hazardous waste to become airborne. TS Machinery vacuum machine retrieves dust, residue and abrasive at the point of blast and eliminates the negatives traditionally associated with open blasting -Contamination, dust, poor visibility, operator exposure, shut down work surrounds, clean up. It allows blasting to be undertaken were no other methods would be acceptable.
Work in all locations
The system can work in horizontal and vertical positions and can by using an extension hose can be operated Up to 60 meters from the equipment.
Continuous blasting
As it is air powered there is a constant supply of compressed air to the cleaning and vacuum nozzle which enables the work to be completed quicker, cleaner and thus is cost effective and reduces downtime.
Is it friendly to the environment?
Dry blasting prevents the emission of toxic substances (lead paint) in to the environment unlike conventional blasting. The unit has a self contained collection drum. There is no need to clean up large areas as the vacuum system negates the need to do so.
Health and safety
Like most industrial processes there is always an element of danger and dry blasting is no exception. The dangers that operators will be exposed to consist of noise, compressed air and manual handling.
Vacuum Blasting In Process
